950-WT1
Amatrol’s Basic Pneumatics training system (85-BP) introduces pneumatic principles through a combination of Amatrol’s top-flight multimedia curriculum with hands-on industrial pneumatic skill-building. Topics covered in this learning system include single-acting cylinder circuits, pressure vs. cylinder force, and flow control valves, while the panels can be used to practice skills such as connecting and operating a needle valve to control actuator speed.
Prepare Your Team with Immersive Simulator-Based Training
Acron Aviation is a U.S.-based manufacturer of high-performance driving simulators designed to meet the training needs of commercial fleets, emergency responders, and aviation ground operations. Their simulator systems combine realistic driving scenarios, ergonomic hardware, and proven curriculum support to enhance safety and preparedness.
Train Safer. Smarter. More Efficiently.
These immersive systems recreate real-world driving conditions in a controlled environment, allowing drivers to develop essential skills—including vehicle handling, judgment, and situational awareness—without endangering personnel or equipment.
Key Features
- True-to-life controls and immersive vehicle environments
- Scenario-based training paths and customizable curriculum
- Multi-vehicle configuration and modular hardware options
- Performance tracking, feedback, and reporting tools
- Durable build quality with options for classroom or mobile setups
Whether for public safety, commercial logistics, or aviation ground support, Acron Aviation simulators are purpose-built to deliver consistent, repeatable, and data-driven training outcomes.
Acron Aviation’s driving simulators deliver immersive, hands-on training experiences—empowering drivers to develop critical skills in a risk-free environment. These cutting-edge systems provide real-world practice without putting personnel, vehicles, or equipment in harm’s way.
By simulating high-risk scenarios and complex environments, Acron Aviation’s simulators help trainees build confidence, sharpen decision-making, and enhance operational readiness—safely and effectively.
Why Use Driving Simulators?
Simulation-based driver training allows organizations to expose personnel to a variety of high-stress and hazardous situations within a controlled and repeatable environment. Instructors can monitor response times, track behaviors, and deliver structured after-action reviews that highlight performance strengths and improvement areas. The result: safer drivers, smarter decisions, and more resilient operations.
6 Reasons Why Simulation-Based Training Works
Increased Learning Retention
Modern experiential training platforms promote stronger learning transfer and long-term retention through active engagement.
Progressive Skill Development
Adaptive training paths help learners build core competencies, develop defensive driving habits, and master increasingly complex maneuvers.
Standardized Curriculum
Ensure consistency across your organization with uniform training protocols that meet your department’s goals and compliance needs.
Situational Awareness
Realistic scenarios build critical thinking and enhance the trainee’s ability to assess, react, and adapt in high-stakes environments.
Scenario Customization
Create targeted training experiences that align with your specific operational demands, routes, and response procedures.
Safe, Controlled Environment
Reinforce curriculum through repeatable practice in simulated environments—without the risk of injury, damage, or downtime.
Efficacy of Driving Simulators
Research from institutions worldwide confirms the effectiveness of simulation in training programs. Simulation-based training is proven to accelerate learning, improve driver performance, and reduce incident rates—making it a valuable investment for any organization prioritizing safety and readiness.
Driving Simulation Solutions
Acron Aviation’s simulator solutions are engineered for results. These immersive systems allow drivers to gain experience, build muscle memory, and develop judgment skills—without the risk, cost, or downtime of live vehicle training.
Shaping the Automotive Service Industry
Since 1972 the National Institute for Automotive Service Excellence (ASE), an independent non-profit organization, has worked to improve the quality of vehicle repair and service by testing and certifying automotive professionals. With over a quarter of a million individuals holding an ASE certification, ASE Certified professionals work in every part of the transportation industry.
We offer training solutions aligned with the certifications below. Our solutions are 100% aligned unless marked with an asterisk. *The content and equipment currently cover 70% of the tasks for the tests.
Supported Automotive Certifications
Entry-Level Automotive Tests
Automatic Transmission/Transaxle (AT)
Brakes (BR)
Electronic/Electrical Systems (EE)
Engine Performance (EP)
Engine Repair (ER)
Heating and Air Conditioning (AC)
Manual Drive Train and Axles (MD)
Maintenance and Light Repair (MR)
Service Technology
Suspension and Steering (SS)
Entry-Level Medium/Heavy Truck Tests
Brakes (TB)*
Diesel Engines (DE)*
Electrical/Electronic Systems (TE)*
Suspension and Steering (TS)*
ASE Refrigerant Recovery and Recycling
Training Solutions
The Smart Automation Certification Alliance (SACA) is a non-profit organization whose mission is to develop and deploy modular Industry 4.0 certifications for a wide range of industries. SACA provides highly affordable, accessible certifications ensuring that companies have the highly skilled workers they need and individuals are prepared to be successful in an Industry 4.0 world.
Skill Validation
Certifying over 100,000 candidates, the Manufacturing Skill Standards Council (MSSC)®, an industry-led 501(c)3 non-profit, is America's leader in training and certifying foundational technical competencies for front-line technicians for in-demand, higher-wage, higher-skill jobs in advanced manufacturing and supply chain logistics.
Technicians with MSSC Certifications are qualified for 11.3 million jobs in front-line production, material handling, and distribution. 84% of executives surveyed agree there is a talent shortage in U.S. manufacturing. MSSC is helping industry close that gap as they prepare to manufacture the future!
Training Solutions
NOCTI is the leading provider of industry credentials and resources for career and technical education (CTE) programs nationwide. With over 50 years of experience, NOCTI is a pioneer in creating customized and standardized credentialing solutions and is a valuable partner in the CTE community’s efforts to improve America’s workforce.
NOCTI credentials are developed by teams of subject matter experts to meet industry standards and requirements and result in credentials measuring skills and competencies critical for student success outside the classroom.
Our goal is to help training facilities equip CTE students with the skills and knowledge for success. NOCTI credentials measure the skills needed by the future workforce. Students gain confidence in their skills, and educators can validate learning and enhance the credibility of their programs.
Supported Credentials
We offer content and equipment to cover tasks for the following certifications:
- Diesel Technology - Job Ready
- Engineering Technology Foundations
- Manufacturing Technology
- Pre-Engineering/Engineering Technology - Job Ready
- Computer Networking Fundamentals - Job Ready
- Computer Repair Technology - Job Ready
- Cybersecurity Fundamentals
Training Solutions
NIMS credentials set the baseline for your curriculum, provide a method of measuring instructor quality, and enable your students to work towards a national, industry-recognized achievement. Plus, credentials are a foundation for articulating experience into college credit and apprenticeships.
Students can begin earning credentials at any time. Instructor credentials are not required, nor are site inspections. Check out the process of earning a NIMS credential to get started.
NIMS ITM Certifications are available in each of the following duty areas:
Duty Area 1
Maintenance OperationsDuty Area 2
Basic Mechanical SystemsDuty Area 3
Basic Hydraulic SystemsDuty Area 4
Basic Pneumatic SystemsDuty Area 5
Electrical SystemsDuty Area 6
Electronic Control SystemsDuty Area 7
Process Control SystemsDuty Area 8
Maintenance WeldingDuty Area 9
Maintenance Piping
Maintenance OperationsDuty Area 2
Basic Mechanical SystemsDuty Area 3
Basic Hydraulic SystemsDuty Area 4
Basic Pneumatic SystemsDuty Area 5
Electrical SystemsDuty Area 6
Electronic Control SystemsDuty Area 7
Process Control SystemsDuty Area 8
Maintenance WeldingDuty Area 9
Maintenance Piping
These stackable credentials enable students to learn and earn at the same time!
Training Solutions
National Center for Construction Education & Research (NCCER) provides industry-recognized credentials for students and craft professionals.
Supported Certifications
We offer a supplemental curriculum that is 60-70% aligned with the certifications below.
- NCCER Commercial Electrician
- NCCER Core
- NCCER Electrical Level I
- NCCER Electrical Level II
- NCCER Electronic System Technician Level I
- NCCER Electronic System Technician Level II
Training Solutions
The Computing Technology Industry Association (CompTIA) is a leading voice and advocate for the $5 trillion global information technology ecosystem; and the estimated 75 million industry and tech professionals who design, implement, manage and safeguard the technology that powers the world’s economy.
Through education, training, certifications, philanthropy, and market research, CompTIA promotes industry growth, the development of a highly-skilled workforce, and a commitment to creating an environment where innovation happens and the opportunities and benefits made possible through technology are available to all.
Training Solutions
Cybersecurity Fundamentals affirms the learner's understanding and ability to perform in today’s cybersecurity-threatened business and IT environments. To earn the certification, the learner will be able to demonstrate practical competence in security tools, threats, and vulnerabilities, describe risk management processes and practices, and more.
Learners that earned this certificate have demonstrated knowledge of cyber security risk, data, language, and technologies.
Training Solutions
Pages
-
Item Number:85-BP -
Item Number:85-EHThe Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical/electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications. -
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
-
The BOFA inline prefilters have been designed specifically for applications that generate high amounts of dust or particulate. -
Item Number:LMT-300LMT-300 CNC Mill-Turn is a cutting-edge aluminum cutting machine -
Item Number:LMV-300 CNCThe LMV-300 CNC machine dubbed “Quicksilver” delivers high rigidity, high accuracy and high-speed machining for all your cutting needs. The entire machine’s construction stably attaches to a granite bed thus dampening vibrations and making the machine a robust system. The cornerstone of the machine is that it is literally made from stone.
-
A compact 3 axis CNC micromill milling machine with totally enclosed interlocking guards - the ideal introduction to small part CNC manufacture. Variable spindle speeds and feedrates make the MicroMill ideal for cutting resistant materials such as wax, plastic, acrylic, aluminum and free cutting alloys. -
A compact 2 axis CNC lathe, with totally enclosed interlocking guards - the ideal introduction to small part CNC manufacture. Variable spindle speeds and feedrates make the MicroTurn ideal for cutting resistant materials such as wax, plastic, acrylic, aluminum and free cutting alloys. -
Denford's high-spec / low-cost solution for all your routing, milling and engraving needs. The MRC 40 has a powerful 500W spindle motor and offers high speed manufacture linked with a large working envelope. This versatile machine handles small engraving jobs, and the large working envelope and Z axis capability (110mm) is perfect for the manufacture of large 3D designs. Set-up and tool changes are a simple process, and the MRC 40 has a host of optional extras for specialist applications.
