Amatrol’s Basic Pneumatics training system (85-BP) introduces pneumatic principles through a combination of Amatrol’s top-flight multimedia curriculum with hands-on industrial pneumatic skill-building. Topics covered in this learning system include single-acting cylinder circuits, pressure vs. cylinder force, and flow control valves, while the panels can be used to practice skills such as connecting and operating a needle valve to control actuator speed.
A translucent stereolithography material for when you need to see the inner workings of the part you’re creating.
Somos® 9120 is a transparent stereolithography resin that is easy to use and fast to build. This stereolithography resin produces translucent, accurate parts that are semiflexible. Parts produced with Somos® 9120 exhibit excellent water and temperature resistance and mimic polypropylene.
Somos® 9120 is ideal for applications such as fluid flow analysis, electrical casings and automotive parts. As this material is semi-flexible, it can also be used for snap-fit functional testing.
Every material comes with a safety data sheet (SDS) to provide you with information to properly handle that specific liquid stereolithography resin. While there are risks of skin sensitization, these can be easily prevented with good housekeeping, good hygiene and use of personal protective equipment (PPE).
Formulated differently than conventional materials, UV-curable products require particular instruction for their safe handling. The information provided in this guide is designed to acquaint you with UV-cure technology, identify its potential hazards, and provide general direction and guidelines for the safe application and efficient use of solvent-free, UV-curable products.
This booklet is a guide for safe handling only. The precautions outlined here should be followed in close combination with instructions provided on our product labels and Material Safety Data Sheets (MSDS), as well as in consultation with your representative regarding your specific product.
Somos® BioClear has passed cytotoxicity, irritation, sensitization, and USP VI. A toxicological profiling of the components has been performed. A Device Master File to support this material is accessible through the FDA. Ask a sales representative for more information.
Steps in the production process of 3D printed parts can influence the final part safety. This document gives guidance on areas to pay attention to when using Somos® BioClear.
Improve efficiency with clear, accurate guides and models.
Perform faster, more accurate procedures with customized cutting guides and surgical models made with Somos® BioClear. Not only will this decrease the recovery time for patients, it can also lessen the chances of repeat procedures.
Somos® BioClear fulfills the requirements for non-implantable limited body contact (<24hr) medical and dental applications. Somos® BioClear has passed stringent ISO 10993-5 Cytotoxicity, ISO 10993-10 Irritation & Sensitization, and USP Class VI testing, after following the cleaning procedure as described in the Somos® BioClear user guide.
Parts produced from Somos® BioClear are accurate, clear and have ABS-like mechanical properties and a good combination of strength and toughness. The material is resistant to moisture and many common solvents and chemicals.
Fast and easy production of quality hollow composite tooling parts, that are easy to remove after the autoclave process.
While basic composite shapes with constant cross sections are easily manufactured using traditional composite manufacturing techniques, complex parts with hollow interiors present a unique challenge. Additive manufacturing has fundamentally changed the process. High-temperature, cost-effective tools can now be produced in days, compared to the weeks or even months required for traditional tooling, and provides a cost-effective solution even for small series production.
Somos® DMX SL-100, a durable and tough stereolithography (SL) resin, is an efficient and cost-effective solution that produces very accurate parts with a superb surface finish and high feature detail, promoting greater design freedom for composite applications.
Somos® DMX SL-100 withstands the high temperatures utilized in the autoclave process for composites manufacturing maintaining its flexural strength, elongation and tear resistance. These unique properties allow, at a certain temperature, for mandrels to be removed from complex and convoluted geometries through a “dry removal” process which is unique for a solid mandrel. Other soluble wash out cores need submerging in caustic which can affect the composite part. No other material in the industry is as easily and best removed after the autoclave process, facilitating the more efficient production of complex, hollow composite parts.
This method of using additive manufacturing to produce sacrificial tooling is straightforward and enables multiple iterations to be implemented quicker by the user.
In partnership with Covestro Additive Manufacturing (formerly DSM) and its Somos® resins, the Neo 3D printers can run the most technically advanced stereolithography materials.
A stereolithography material engineered to create flawless investment castings patterns.
Through continuous interaction with our customers, pattern makers and foundries, our team developed Somos® Element for producing investment casting patterns.
Somos® Element is an antimony-free stereolithography material specifically designed to improve the repeatability and quality of 3D printed casting patterns. Patterns created with Somos® Element leave trace amounts of lightweight, easily-removable ash residue after burnout and have better green strength, so there’s no worry of breakage during handling, while being dimensionally stable during storage. Any residue left behind is easily removed, leaving a perfectly clean void in the ceramic mold. This translates into lower mold prep times and lower rates of rework, saving customers time and money.
Key Benefits
- Trace amounts of ash that are lightweight and easily removed
- Suitable for high-end alloy castings
- Rapid draining
- Produces accurate, repeatable parts regardless of size
The investment casting material. Through continuous interaction with our customers, pattern makers and foundries, Somos® has developed Somos Element™ as the next generation of stereolithography resins designed explicitly for producing Investment Casting patterns.
When you need the best available balance of performance, faster builds, and post-processing, look no further than Somos® EvoLVe™ 128.
Pages
-
Item Number:85-BP -
Item Number:85-EHThe Electro-Hydraulics training system includes an electrical control panel with relay control components and an electrical valve module with solenoid-operated hydraulic directional control valves and electrical/electronic sensors. These components will be used to study a variety of topics including electrical control systems, basic control devices, power devices, control relays, sequencing control, timer control, pressure control applications, and circuit applications. -
In the rare event that a burning ember or spark is drawn into the fume extraction unit, there is the possibility that debris in the filters could ignite. Although any resultant fire would typically be retained within the fume extraction unit, this would cause significant damage and in extreme circumstances, the risk may extend beyond the extraction unit. For processes where such risks have been identified, additional protection in the form of an in-line firebox is an additional precaution.
-
The BOFA inline pre-filter 1000 has been designed specifically for applications that generate high amounts of dust or particulate.
This inline filter unit is positioned alongside the main BOFA fume filtration system to increase the overall filter capacity and extend the life of the main filters. The DeepPleat DUO pre-filter incorporates a massive drop-out chamber within the filter, having a volume area of 15ltrs. Above the drop-out chamber but still within the housing there is a sealed 200mm deep pleat layer of F8 media giving a surface area in excess of 30 sq meters.
-
The BOFA inline prefilters have been designed specifically for applications that generate high amounts of dust or particulate. -
Item Number:LMT-300LMT-300 CNC Mill-Turn is a cutting-edge aluminum cutting machine -
Item Number:LMV-300 CNCThe LMV-300 CNC machine dubbed “Quicksilver” delivers high rigidity, high accuracy and high-speed machining for all your cutting needs. The entire machine’s construction stably attaches to a granite bed thus dampening vibrations and making the machine a robust system. The cornerstone of the machine is that it is literally made from stone.
-
A compact 3 axis CNC micromill milling machine with totally enclosed interlocking guards - the ideal introduction to small part CNC manufacture. Variable spindle speeds and feedrates make the MicroMill ideal for cutting resistant materials such as wax, plastic, acrylic, aluminum and free cutting alloys. -
A compact 2 axis CNC lathe, with totally enclosed interlocking guards - the ideal introduction to small part CNC manufacture. Variable spindle speeds and feedrates make the MicroTurn ideal for cutting resistant materials such as wax, plastic, acrylic, aluminum and free cutting alloys. -
Denford's high-spec / low-cost solution for all your routing, milling and engraving needs. The MRC 40 has a powerful 500W spindle motor and offers high speed manufacture linked with a large working envelope. This versatile machine handles small engraving jobs, and the large working envelope and Z axis capability (110mm) is perfect for the manufacture of large 3D designs. Set-up and tool changes are a simple process, and the MRC 40 has a host of optional extras for specialist applications.
