DAC Worldwide’s Centrifugal Clutch Cutaway (200-2204) depicts a modified industrial centrifugal clutch for mechanical drive training in a classroom or laboratory. This sectioned mechanical power transmission component uses centrifugal force to connect two concentric shafts by throwing a centrifugal shoe outwards at a right angle to the primary shaft axis, which allows for shift during start-up.
Reduced emissions and decreased fuel usage serve as guiding principles for the forthcoming generation of contemporary vehicles. Hybrid automobiles and electric cars aren't just future concepts—they're already on the roads. However, to effectively diagnose these vehicles, a comprehensive understanding of the necessary systems remains the sole logical strategy.
Lucas-Nülle's CarTrain “Hybrid and Electric Vehicle Trainer (ASE L3)” is an advanced educational system meticulously designed to delve into the intricate workings of hybrid and electric vehicles. This trainer provides an immersive hands-on experience, allowing learners to explore the complexities of these modern automotive technologies. With a comprehensive array of modules covering hybrid drive systems, electric propulsion, battery management, and vehicle control, this innovative training solution offers a deep understanding of the principles and practicalities behind hybrid and electric vehicles.
Thsi training system caters to automotive professionals aiming to achieve ASE L3 certification and equips them with the expertise needed to diagnose, service, and maintain these cutting-edge vehicles effectively. The CarTrain not only prepares technicians for the challenges of today's automotive landscape but also fosters a thorough comprehension of sustainable and future-focused transportation technologies.
Explore the groundbreaking world of Smart Grid technology with LN's innovative training system! Dive into their captivating video featuring Marcela and Chris as they unravel the transformative power of LN's Smart Grid training. Witness how this system empowers individuals and institutions to grasp, utilize, and maximize the potential of Smart Grids. Discover the revolutionary impact of this advanced technology on electricity management, enhancing grid efficiency, intelligence, and sustainability.
Delve into a realm of extensive training possibilities spanning advanced manufacturing, chemical manufacturing, marine, military, oil & gas, and power generation. The DAC 280 has been meticulously crafted to furnish a thorough comprehension of pump sealing systems, imparting invaluable insights and actionable advice.
See the newest addition to Stratasys' line-up - F3300. This introductory video will give you a glimpse of the new F3300 system, in addition to sharing some of its key features and benefits.
Ogle chose Stratasys’ Neo stereolithography 3D printers to maintain its position at the forefront of innovation, and it is now a central part of the company’s ability to meet and exceed customer expectations.
In this video, Amatrol visits East High School in Youngstown, Ohio, to see what’s happening in its Manufacturing Technology class, which uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
Manufacturing Technology instructor James Alexi explains that Youngstown, a rust belt steel mill town in the past, is experiencing a manufacturing revival and his program helps to prepare students for the advanced manufacturing jobs of the present and future.
Check out the hands-on skills that students are learning in Advanced Manufacturing class at William Henry Harrison High School in southwestern Ohio! This exciting class uses the eLearning curriculum and hands-on trainers in Amatrol’s groundbreaking IGNITE: Mastering Manufacturing program.
At Brookfield High School in Ohio, students are forging their way to all kinds of career pathways through credentials, training ,and a fantastic lab space! Take a look at our visit to the high school, hear from students and teachers, and see how they're getting their hands on great opportunities.
Step into the world of career and technical education at Chardon High School in northeastern Ohio, where The CREW [Creating Reliable Educated Workers] program thrives. Our dedication to advancing education through practical experience is evident in our collaboration with Amatrol's Industry 4.0 Fundamentals program, employing eLearning modules and hands-on trainers.
In an enlightening video, Tracey Britt, a CTE Instructor at Chardon High School, sheds light on The CREW's inception and its pivotal role in equipping students with the knowledge and hands-on skills demanded by local manufacturers. Through personal accounts from students, witness the profound impact of our program in preparing them for the workforce.
Additionally, Britt highlights the program's emphasis on stackable certifications from the Smart Automation Certification Alliance (SACA). These certifications not only pave the way for lucrative employment opportunities but also offer students the chance to earn college credit. Celebrate the success stories, including four seniors who graduated with full-time jobs in manufacturing, a testament to our program's efficacy.
In this video, Mike Idle provides an overview of Amatrol’s Combined Refrigeration Installation Learning System (T7200). This mobile, double-sided trainer teaches users how to install electrical and mechanical refrigeration and air conditioning components for both residential and light commercial applications, making it a great introduction to the field of refrigeration.
Multiple real-world components are included with this system, enabling users to practice hands-on skills they will use on the job. Some of these components include a semi-hermetic compressor, evaporator coil, condenser coil, thermostat, electronic temperature control range, circuit breaker panel, and much more.
Using the included multimedia curriculum, users will learn how to operate a thermostat, prepare and install copper tubing, and cut, pull, splice, and install wiring for multiple different types of applications.
Pages
-
Item Number:200-2204 -
Item Number:211CThe design of the Centrifugal Compressor Model is based upon common industrial centrifugal compressors. -
Item Number:950-PM1The model 950-PM1 Pumps Learning System teaches skills related to centrifugal pumps, which are used in almost every industry to transfer non-hydraulic fluids of various types from one place to another. Students learn a comprehensive set of industry-relevant skills including how to operate, install, maintain, troubleshoot, analyze performance, and select centrifugal pumps as well as system design. -
The CFT program was created in partnership with the Material Handling Equipment Distributors Association (MHEDA) to provide skills to entry-level forklift technicians, enhancing their performance in the world of material handling. The CFT prepares individuals to repair and maintain technical systems utilizing key engineering principles that underpin most forklift vehicles. -
Item Number:C-101 / C-102 / C-103 / C-104SACA’s Associate certifications are introductory Industry 4.0 certifications appropriate for operators and other individuals seeking to become familiar with Industry 4.0 factory floor automation equipment and processes. -
SACA’s Certified Industry 4.0 Professional certification is an engineering certification that focuses on the analysis, design, and optimization of Industry 4.0 systems. It prepares engineers to succeed in positions in modern production environments that use Industry 4.0 technologies. -
SACA’s Specialist certifications certify Industry 4.0 technical skills in operations, troubleshooting, programming, maintenance, and systems integration. Each certification is keyed to a skilled occupation. -
The purpose of the Certified Logistics Technician (CLT) program is to recognize through certification individuals who demonstrate mastery of the core competencies of material handling at the front-line (entry-level through front-line supervisor) through successful completion of the certification assessments. -
Item Number:CPT / CPT+ / CPT 4.0The purpose of the Certified Production Technician (CPT) ® 4.0 certification program is to recognize through certification, individuals who demonstrate mastery of the foundational, core competencies of advanced manufacturing production at the entry-level to front-line supervisor through successful completion of the certification assessments. -
Item Number:CT-SCAMSSC’s Certified Technician in Supply Chain Automation (CT-SCA) logistics certification enables both students and incumbent workers to gain the skills needed to meet the definition of a supply chain automation technician established by the National Science Foundation-funded National Center for Supply Chain Automation: a technician who installs, operates, supports, upgrades or maintains the automated material handling equipment and systems which support the supply chain.
