Amatrol's 990-SN1 includes various electronic sensors, such as capacitive proximity, inductive proximity, magnetic reed, hall-effect, and photoelectric. These sensors can be used with a provided test materials to teach how each sensor completes industrial tasks. Combined with Amatrol’s curriculum, this innovated tool provides a thorough understanding of electronic sensor applications.
Industrial Pump Maintenance and Troubleshooting
The Gear Pump Learning System (95-PM1-F) covers the function, operation, installation, and maintenance of the versatile gear pump. This low maintenance pump can transfer a wide array of fluids and fluid viscosities for spraying, recirculating, cleaning, and fluid transfer applications. One of the most common applications of a gear pump is in an automobile’s automatic transmission. This industrial pumps training system also provides information on pump inspection, pump disassembly, pump maintenance, and pump troubleshooting, as well as how to select the proper gear pump for an application and how to calculate theoretical and actual flow rates.
Pump Maintenance & Troubleshooting Skills
The Magnetic Pump Learning System (95-PM1-G) covers the magnetic pump, which uses a magnetic coupling to prevent direct contact between the motor drive shaft and the pump impeller. This feature eliminates any possibility of leakage or seepage and makes the magnetic pump an ideal selection for pumping hazardous chemicals that could harm the environment or for expensive liquids where it is important to reduce loss. This industrial pumps training system explains the function, operation, installation, disassembly, inspection, and maintenance of a magnetic pump.
Additional topics include: how to properly align the magnetic coupling; how to troubleshoot problems; how to select the correct magnetic pump for an application; how to determine a pump’s flow/pressure characteristics; and how each component of the pump factors into the overall operation.
Pump Maintenance Skills
The Centrifugal Pump with Stuffing Box Learning System (95-PM1H) covers a pump design that, in spite of the modern mechanical seal, remains widely used in industry due to its cost-effectiveness and ability to avoid catastrophic failure. This feature makes it an ideal design for fire departments in fire pump applications. This industrial pumps training system explains the installation, function, and maintenance of a centrifugal pump with a stuffing box.
Additional topics include: how to troubleshoot this pump design; what the flow/pressure characteristics of a centrifugal pump are; and how to startup and operate a centrifugal pump with a stuffing box.
The model 950-PM1 Centrifugal Pumps Training System teaches skills related to centrifugal pumps training, which are used in almost every industry to transfer non-hydraulic fluids of various types from one place to another. Students learn a comprehensive set of industry-relevant skills including how to operate, install, maintain, troubleshoot, analyze performance, and select centrifugal pumps as well as system design.
The model 950-PM1 includes a centrifugal pump, mobile test workstation, student learning materials for both theory and lab, and teacher’s guide. This centrifugal pumps operation and maintenance training system uses industrial quality components such as a cast iron centrifugal pump to help students become better prepared for what they will encounter on the job.
Amatrol’s Rigging 2 Learning System (95-RGB2) adds to the first Rigging training system (950-RGB1) to offer a comprehensive learning experience, to teach rigging safety training and industrial crane operation skills, and to help learners prepare for certifications. This hands-on Rigging training system expands on the initial offering of rigging knowledge to include synthetic slings, equipment movement, and industrial cranes. Proper rigging techniques are vital for efficient movement of loads and workers safety.
This Crane Operation training course includes two synthetic slings, four load protection pads, jack, lever dolly, and much more! These components will be used to explore topics such as synthetic sling operation, equipment movement using roller bars and dollies, and crane operation signals. In addition to equipment and printed curriculum, this industrial system offers a student reference guide, instructor’s manual, installation guide, and an optional online rigging training course.
Amatrol’s Rigging 3 Learning System (95-RGB3) adds to the initial hands-on rigging training systems (950-RGB1 and 95-RGB2) by including hands-on wire mesh sling skills, rigging knots training, and rigging safety skills. This advanced rigging training system provides learners with additional components and skills to further expand their understanding and competency of rigging. Proper rigging techniques are vital for efficient movement of loads and workers safety.
This advanced rigging training system includes a rope system, D-shackle, steel tubing, a metal mesh sling, and much more! These components will be used to explore topics such as making a long, short, and eye splice in a fiber rope, describing the function of a tag line, and learning how to assemble and lift a load using a wire mesh sling. In addition to equipment and printed curriculum, this system offers a student reference guide, instructor’s manual, installation guide, and an optional online eBook.
Amatrol’s Solar Site Analysis Training System (95-SA1) teaches learners both the theoretical knowledge and hands-on skills they will need to analyze and choose suitable locations for solar arrays and components. Learners begin by studying how to conduct a preliminary site assessment, including applicable codes, jurisdictional authorities, permits, and licenses required for solar energy system installations.
Learners will also use real-world equipment, like the Solar Pathfinder sun path calculator, to perform and interpret a shading analysis in order to determine suitable locations for electrical photovoltaic and solar thermal components. The included multimedia curriculum also teaches other relevant skills, such as developing site layout drawings.
The Solar Thermal Cold Water Supply Station training is designed to reduce the temperature of hot water from the open loop (950-STOL1), closed loop (950-STCL1), or installation solar thermal (950-STF1) learning systems and feed it back to the learning system at a temperature and pressure that is similar to a city water supply. This system will enable the three solar thermal learning systems to be self-contained.
The Solar Thermal Cold Water Supply Station training includes the frame, AC pump, AC chiller, water storage tank, ball valves for shutoffs and bypasses, relief valve to adjust temperature and pressure output, temperature gauges, a pressure gauge at outlet of chiller, control unit, ground fault circuit interrupter, and an AC circuit breaker with lockout / tagout.
Amatrol's AC/DC Electrical Learning Systems 1 and 2 (96-ADE1 and 96-ADE2) cover the fundamentals of electricity, such as electric measurement training and basic electrical cir-cult training, as well as Inductance, capacitance, and transformers. Electricity Is the most widely used utility and the demand will continue to increase as technology continues to grow. This means that more engineers and technicians will be needed to Install, develop, and maintain electrical devices. These learning systems include a large array of Industrial electrical power and control components, typical of what learners will find In real world applications. This hands-on experience Is Invaluable In today's workplace.
Amatrol's Computer Aided Design (CAD) 1 – SolidWorks learning system introduces solid modeling by describing the function of solid modeling software and the features of solid modeling. Solid model creation is taught by having the learner use sketch commands and tools to create a sketch and extruded boss/base features to create a solid model. Solid model features such as drawing planes; extruding cut features, fillets and chamfers; and revolved features are explored. Also included are topics such as multi-view drawings, dimensioning, and title blocks.
Pages
-
Item Number:990-SN1 -
Item Number:990-BH1Amatrol’s Portable Basic Hydraulics Learning System allows learners to gain skills by studying basic hydraulic circuits, pressure control circuits, hydraulic schematics, and sequence valves. The system includes a robust, portable case, eLearning curriculum, and student reference guides. -
Item Number:990-PC1Amatrol’s Portable Process Control Troubleshooting Learning System – Level & Flow (990-PC1F) provides a skill-rich, portable troubleshooting training system for two of the most common types of process control systems, flow and liquid level. -
Item Number:990-PAB53AFAmatrol’s Portable PLC Troubleshooting Learning System - AB CompactLogix L16 (990-PAB53AF) teaches programmable logic controller (PLC) programming, operation, and applications used throughout industry. -
Item Number:990-PABCL1FAmatrol’s PLC Troubleshooting Learning System for the AB CompactLogix provides comprehensive PLC operation and troubleshooting knowledge in a portable format for when training space is constrained, but skill-building cannot be sacrificed! Learners will study topics like Programmable Controller Operation, PLC Ethernet Communication, Basic PLC Project Elements, PLC Motor Control, Event Sequencing, and more! -
Item Number:990-PAB53AFAmatrol's 990-PAB53AF Portable PLC Troubleshooting Learning System provides a comprehensive curriculum and a cutting-edge workstation to teach PLC (Programmable Logic Controller) programming, operation, and applications used in industry. The 990-PAB53AF uses FaultPro, Amatrol’s unique electronic fault insertion, to teach PLC troubleshooting skills, such as PLC input and output testing, software testing, and application troubleshooting. -
Item Number:990-PN1Amatrol's Portable Pneumatics Learning System (990-PN1) offers hands-on training in basic and intermediate pneumatic concepts. Featuring real-world components in a portable case, this system enables learners to practice cylinder operation, flow controls, valves, air motors, and gauges, fostering skill development and workforce readiness. -
Item Number:990-ELE1Amatrol's 990-ELE1 features a various electrical components and circuits, including: AC and DC power supplies, ΔV potentiometer, thermocouples, resistive temperature detectors, thermistors, electronic sensors, solid state relays, transistor and operational amplifiers, field effect transistors, silicon-controlled rectifiers, triacs, and phase control circuits. -
Item Number:990-PG1Amatrol’s Portable Precision Gauging Learning System (990-PG1) covers the fundamentals of basic measurement, precision measurement, direct gauging, indirect gauging, and dimensional measurements using both the U.S. customary system and the SI metric system all within a mobile, highly durable product. Measurement is a cornerstone of all technical career paths and a major part of quality assurance, which helps to keep product quality high and costs low. -
Item Number:990-SM10Amatrol's newest advanced manufacturing trainer is the Portable Smart Manufacturing Learning System (990-SM10). Developed in partnership with CESMII, this system is designed to provide hands-on learning in Smart Manufacturing and Industry 4.0 technologies.
