Prepare Your Team with Immersive Simulator-Based Training

Acron Aviation is a U.S.-based manufacturer of high-performance driving simulators designed to meet the training needs of commercial fleets, emergency responders, and aviation ground operations. Their simulator systems combine realistic driving scenarios, ergonomic hardware, and proven curriculum support to enhance safety and preparedness.

Train Safer. Smarter. More Efficiently.

These immersive systems recreate real-world driving conditions in a controlled environment, allowing drivers to develop essential skills—including vehicle handling, judgment, and situational awareness—without endangering personnel or equipment.

Key Features

  • True-to-life controls and immersive vehicle environments
  • Scenario-based training paths and customizable curriculum
  • Multi-vehicle configuration and modular hardware options
  • Performance tracking, feedback, and reporting tools
  • Durable build quality with options for classroom or mobile setups

Whether for public safety, commercial logistics, or aviation ground support, Acron Aviation simulators are purpose-built to deliver consistent, repeatable, and data-driven training outcomes.

Acron Aviation’s driving simulators deliver immersive, hands-on training experiences—empowering drivers to develop critical skills in a risk-free environment. These cutting-edge systems provide real-world practice without putting personnel, vehicles, or equipment in harm’s way.

By simulating high-risk scenarios and complex environments, Acron Aviation’s simulators help trainees build confidence, sharpen decision-making, and enhance operational readiness—safely and effectively.

Why Use Driving Simulators?

Simulation-based driver training allows organizations to expose personnel to a variety of high-stress and hazardous situations within a controlled and repeatable environment. Instructors can monitor response times, track behaviors, and deliver structured after-action reviews that highlight performance strengths and improvement areas. The result: safer drivers, smarter decisions, and more resilient operations.

6 Reasons Why Simulation-Based Training Works

Increased Learning Retention

Modern experiential training platforms promote stronger learning transfer and long-term retention through active engagement.

Progressive Skill Development

Adaptive training paths help learners build core competencies, develop defensive driving habits, and master increasingly complex maneuvers.

Standardized Curriculum

Ensure consistency across your organization with uniform training protocols that meet your department’s goals and compliance needs.

Situational Awareness

Realistic scenarios build critical thinking and enhance the trainee’s ability to assess, react, and adapt in high-stakes environments.

Scenario Customization

Create targeted training experiences that align with your specific operational demands, routes, and response procedures.

Safe, Controlled Environment

Reinforce curriculum through repeatable practice in simulated environments—without the risk of injury, damage, or downtime.

Efficacy of Driving Simulators

Research from institutions worldwide confirms the effectiveness of simulation in training programs. Simulation-based training is proven to accelerate learning, improve driver performance, and reduce incident rates—making it a valuable investment for any organization prioritizing safety and readiness.


Driving Simulation Solutions

Acron Aviation’s simulator solutions are engineered for results. These immersive systems allow drivers to gain experience, build muscle memory, and develop judgment skills—without the risk, cost, or downtime of live vehicle training.

  • Training Solutions to support ASE certification programs.

Shaping the Automotive Service Industry

Since 1972 the National Institute for Automotive Service Excellence (ASE), an independent non-profit organization, has worked to improve the quality of vehicle repair and service by testing and certifying automotive professionals. With over a quarter of a million individuals holding an ASE certification, ASE Certified professionals work in every part of the transportation industry.

We offer training solutions aligned with the certifications below. Our solutions are 100% aligned unless marked with an asterisk. *The content and equipment currently cover 70% of the tasks for the tests.

Supported Automotive Certifications

Entry-Level ASE Automotive Tests

Entry-Level Automotive Tests

Automatic Transmission/Transaxle (AT)
Brakes (BR)
Electronic/Electrical Systems (EE)
Engine Performance (EP)
Engine Repair (ER)
Heating and Air Conditioning (AC)
Manual Drive Train and Axles (MD)
Maintenance and Light Repair (MR)
Service Technology
Suspension and Steering (SS)

Entry-Level ASE Automotive Tests

Entry-Level Medium/Heavy Truck Tests

Brakes (TB)*
Diesel Engines (DE)*
Electrical/Electronic Systems (TE)*
Suspension and Steering (TS)*

ASE Refrigerant Recovery and Recycling

Training Solutions

  • Training Solutions for SACA Certifications

The Smart Automation Certification Alliance (SACA) is a non-profit organization whose mission is to develop and deploy modular Industry 4.0 certifications for a wide range of industries. SACA provides highly affordable, accessible certifications ensuring that companies have the highly skilled workers they need and individuals are prepared to be successful in an Industry 4.0 world.

Skill Validation

  • Manufacturing Skill  Standards Council (MSSC)

Certifying over 100,000 candidates, the Manufacturing Skill Standards Council (MSSC)®, an industry-led 501(c)3 non-profit, is America's leader in training and certifying foundational technical competencies for front-line technicians for in-demand, higher-wage, higher-skill jobs in advanced manufacturing and supply chain logistics.

Technicians with MSSC Certifications are qualified for 11.3 million jobs in front-line production, material handling, and distribution. 84% of executives surveyed agree there is a talent shortage in U.S. manufacturing. MSSC is helping industry close that gap as they prepare to manufacture the future!

Training Solutions

  • NOCTI Certifications

NOCTI is the leading provider of industry credentials and resources for career and technical education (CTE) programs nationwide. With over 50 years of experience, NOCTI is a pioneer in creating customized and standardized credentialing solutions and is a valuable partner in the CTE community’s efforts to improve America’s workforce.

NOCTI credentials are developed by teams of subject matter experts to meet industry standards and requirements and result in credentials measuring skills and competencies critical for student success outside the classroom.

Our goal is to help training facilities equip CTE students with the skills and knowledge for success. NOCTI credentials measure the skills needed by the future workforce. Students gain confidence in their skills, and educators can validate learning and enhance the credibility of their programs.

Supported Credentials

We offer content and equipment to cover tasks for the following certifications:

  • Diesel Technology - Job Ready
  • Engineering Technology Foundations
  • Manufacturing Technology
  • Pre-Engineering/Engineering Technology - Job Ready
  • Computer Networking Fundamentals - Job Ready
  • Computer Repair Technology - Job Ready
  • Cybersecurity Fundamentals

Training Solutions

  • Training Solutions that support NIMS Credentials

NIMS credentials set the baseline for your curriculum, provide a method of measuring instructor quality, and enable your students to work towards a national, industry-recognized achievement. Plus, credentials are a foundation for articulating experience into college credit and apprenticeships.

Students can begin earning credentials at any time. Instructor credentials are not required, nor are site inspections. Check out the process of earning a NIMS credential to get started.

NIMS ITM Certifications are available in each of the following duty areas:

These stackable credentials enable students to learn and earn at the same time!

Training Solutions

  • Vocational Training Equipment and Curriculum

National Center for Construction Education & Research (NCCER) provides industry-recognized credentials for students and craft professionals.

Supported Certifications

We offer a supplemental curriculum that is 60-70% aligned with the certifications below.

  • NCCER Commercial Electrician
  • NCCER Core
  • NCCER Electrical Level I
  • NCCER Electrical Level II
  • NCCER Electronic System Technician Level I
  • NCCER Electronic System Technician Level II

Training Solutions

  • Comptia Certification Training Solutions

The Computing Technology Industry Association (CompTIA) is a leading voice and advocate for the $5 trillion global information technology ecosystem; and the estimated 75 million industry and tech professionals who design, implement, manage and safeguard the technology that powers the world’s economy.

Through education, training, certifications, philanthropy, and market research, CompTIA promotes industry growth, the development of a highly-skilled workforce, and a commitment to creating an environment where innovation happens and the opportunities and benefits made possible through technology are available to all.

CompTIA A+ Certification
CompTIA IT Fundamentals+
CompTIA Network+
CompTIA Security+

Training Solutions

  • Information Systems Audit and Control Association (ISACA)

Cybersecurity Fundamentals affirms the learner's understanding and ability to perform in today’s cybersecurity-threatened business and IT environments. To earn the certification, the learner will be able to demonstrate practical competence in security tools, threats, and vulnerabilities, describe risk management processes and practices, and more.

Learners that earned this certificate have demonstrated knowledge of cyber security risk, data, language, and technologies.

Training Solutions

Pages

  • DAC Worldwide Process Control
    3-Variable Process Control Training System
    Item Number:
    601-000
    DAC Worldwide’s 3-Variable Process Control Training System (601-000) is a working, large-scale, fluid process system allowing for hands-on training relating to the measurement and control of process variables including level, pressure, and flow.
  • Operation & Maintenance Skills Cutaway Trainer
    3-Way Control Valve Cutaway Training
    Item Number:
    256
    DAC Worldwide’s 3-Way Control Valve Cutaway, ¾”-1” (256) takes classroom training in the operation, construction, and maintenance of an industrial control valve, and enhances it by providing a visual, hands-on learning aide. The fully-detailed examples of industrial three-way valves give learners a first-hand view into a component that is found in various maintenance applications worldwide.
  • 3D PrintPRO range of 3D printing fume extraction and filtration
    3D PrintPRO 2

    The BOFA 3D PrintPRO 2 is a low-cost unit that extracts fumes generated by the printer without causing the filament deposition area to be cooled.

    It has the benefits of low noise level and minimal power consumption. Each unit is supplied with a connection hose, ‘Stay Put’ arm and conical shaped nozzle.

  • 3D PrintPRO range of 3D printing fume extraction and filtration
    3D PrintPRO 3

    The BOFA 3D PrintPRO 3 incorporates an externally mounted plenum system which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.

    The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption, and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ plenum instructions.

  • 3D PrintPRO range of 3D printing fume extraction and filtration systems
    3D PrintPRO 4

    The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction off take point. the system can also return the filtered clean air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.

    The BOFA 3D PrintPRO 4 combines high flow rate with speed control within a compact free-standing unit.

  • OnRobot Collaborative Robot Accessories
    3FG15 Finger Gripper
    Item Number:
    3FG15
    With a payload of up to 15kg, the 3FG15 is ideal for gripping a wide range of cylindrical objects in machine-tending applications such as CNC lathe machines and offers seamless integration with the robots of your choice.
  • DAC Industrial Skills Training Model
    4-Variable Advanced Process Control Training System
    Item Number:
    603-000
    Hands-on exercises include industry-relevant process control skills, such as: setting and adjusting pressure switches; installation and calibration of an electronic flow measurement channel; and determining a temperature, pressure, level, and flow process’ operation characteristics.
  • Hands-On Electrical Skills Trainer
    AC Variable Frequency Drive Training System Plus
    Item Number:
    429E
    DAC Worldwide’s AC Variable Frequency Drive Training System Plus (429E) examines AC variable speed drive principles. Learners will explore variable frequency AC solid-state control of 3-phase electric motors in various automation applications.
  • Teach Basic Electrical Skills Hands-On
    AC/DC Electrical Learning System
    Item Number:
    T7017A
    The model T7017A includes a bench top-mount workstation, AC power supply, DC power supply, electrical components set, lead set, hand-held multimeter, circuit tester, built-in instrumentation console, electrical circuit simulation software, student learning materials for both theory and lab, and teacher’s assessment guide. This system uses industrial quality components to help students become better prepared for what they will encounter on the job.
  • DAC HVAC Cutaway
    ACR Liquid Line Filter/Drier Cutaway
    Item Number:
    373-601
    DAC Worldwide’s ACR Liquid Line Filter/Drier Cutaway is a carefully-crafted, sectioned example of a commonly-encountered liquid line filter/drier.

Pages

Displaying 71 - 80 of 597