Amatrol’s Wind Turbine Generator Control Troubleshooting allows students to develop operation and troubleshooting skills...
Amatrol’s PLC Troubleshooting Learning System - AB ControlLogix (890-AB5500) teaches troubleshooting, programming, and applications of Allen-Bradley’s ControlLogix PLC. The programmable controller is considered by many to be the most important development ever in industrial automation, because it is a prepackaged, industrially-hardened computer that can be quickly programmed to control a wide range of industrial processes and machines. The A-B ControlLogix training system adds to the Programmable Controller Troubleshooting Workstation (890-PECB) and also requires a computer and RS Logix 5000 PLC programming software.
The A-B ControlLogix training system includes an Allen-Bradley PLC with ControlLogix 5000 processor, an I/O Connector Kit, and a Fault Insertion Engineering Integration and Connector Kit. These components will be used to cover a wide variety of PLC topics, applications, and skills, such as PLC operation, communications, programming, motor control, I/O interfacing, timer and counter instructions, and systems and I/O troubleshooting. The ControlLogix 5000 is a PLC that learners will actually find in automated manufacturing facilities and other industrial settings, so the skills and knowledge that they gain from the A-B ControlLogix training system will be directly applicable to real-world environments.
Amatrol’s Programmable Controller Troubleshooting Workstation (890-PECB) teaches programming and troubleshooting of programmable logic controllers (PLCs) and their use in industrial, commercial, and residential applications. The PLC Troubleshooting Workstation teaches PLC troubleshooting like no other product by providing a hands-on learning station that models real world PLC-controlled machines with up to 40 faults that can be inserted into the system. It’s the first product to offer a realistic PLC troubleshooting experience for students, because the faults are inserted throughout the system, including inside the PLC!
Hands-On Maintenance & Troubleshooting Skills
Amatrol’s Central Lubrication Learning System (950-CL1) teaches learners valuable central lubrication maintenance and troubleshooting skills. Central lubrication systems are used throughout industry, and learners using the central lubrication training system will gain hands-on skills operating, maintaining, and troubleshooting both piston distributor and series/progressive valve lubrication systems.
The central lubrication training system features an electric pump and a programmable system controller. Users will learn how to operate and program these industry-standard components, gaining real-world experience with the types of equipment they’ll encounter on the job. Learners will also study a variety of other topics, including oils, greases, and lubricant management.
Amatrol’s 950-GEO2D Geothermal Troubleshooting Learning System with Desuperheater uses an exposed component layout so that learners can see each component’s role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Sight glasses installed in the 950-GEO2 allow the learner to see the refrigerant’s changing state as it passes through the system. Amatrol also includes pressure and temperature gauges at key points to show the system’s performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously.
The 950-GEO2D is equipped with FaultPro, Amatrol’s premier electronic fault insertion program for teaching troubleshooting skills. Using FaultPro, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system.
Amatrol’s Hydraulic Maintenance Learning System (950-HM1) teaches skills related to servicing and maintaining hydraulic systems and components. Hydraulic systems are used in innumerable industrial areas like automotive, packaging, pharmaceutical, and food processing. This learning system provides a valuable learning experience for industrial maintenance technicians, system installers, and many others by covering hydraulic filter and fluid maintenance, fittings, seals, hydraulic hose and clamping devices, hydraulic tubing, and hydraulic component installation.
This system includes a mobile workstation, hose set and tubing rack, flush cart module, fittings module, component panel, and fluid servicing kit. Amatrol uses industry-standard components on its systems to ensure that learners gain hands-on practice with mechanisms they’ll use on-the-job. This improves both confidence and competency when performing tasks like replacing a spin-on filter or strainer, adding fluid to a hydraulic system, installing an O-ring seal, bleeding a hydraulic cylinder, or mounting and aligning a hydraulic cylinder.
Amatrol’s Hydraulic Troubleshooting Learning System (950-HT1) teaches advanced hydraulic troubleshooting like no other product by providing a hands-on learning station that models a real world hydraulically-powered machine and includes over 40 faults that can be inserted into the system. The 950-HT1 is the first product to offer a realistic electrical component troubleshooting experience for students, because the faults are inserted throughout the system, including the hydraulic, mechanical and electrical components.
Amatrol’s Basic Hydraulic Troubleshooting Learning System (950-HTB1) teaches learners how to troubleshoot hydraulic systems and their components, such as hydraulic motors, directional control valves, and cylinders. The system combines comprehensive curriculum with real-world equipment to create a valuable learning experience for maintenance technicians across a wide variety of industries. It also provides a strong foundation for those seeking important industry-standard certifications.
The hydraulic troubleshooting system features over 35 manually-inserted faults to help learners understand and practice troubleshooting common problems found in hydraulic systems. Sample faults include: motor starter failure, defective pump, worn cylinder seals, blocked flow control valves, and blocked inlet ports.
Amatrol's Mechanical Fabrication Learning System (950-MPF1) covers industry-relevant mechanical fabrication skills from basic to more sophisticated power tools, including skills ranging from using c-clamps, vises, and pliers, to more advanced torque tools, torque wrenches, and power tools. Students learn about the many types of bolts, wrenches and other fittings commonly used in industry and how to properly apply them. This includes pneumatic fabrication fittings. Testing fittings with air and a liquid soap solution determines if a pressure type seal has been made. This technique is often used in industry because there is too much noise on the plant floor to hear a leak and determine its precise location.
Print Reading is a foundational skill use throughout many industries. Amatrol’s Print Reading eLearning Courseware (M12207) covers topics like print dimensioning, assembly drawings and fasteners, and geometric dimensioning & tolerancing (GD&T). Learners using Amatrol’s print reading training course will study sketching, multiview drawings, dimensioning rules, first-angle projection, holes and fasteners, assembly drawings, assembly tolerances, and feature control frames. From this building block, learners can practice industry-relevant skills like selecting the appropriate number of views for an object, interpreting information blocks on a print, and calculating the limits of a dimension given its tolerance.
Amatrol's Piping Learning System (950-PS1) teaches learners how to lay out and assemble a fluid piping system used in industrial, construction, agricultural, and transportation applications. Students will learn how to select, size, identify, and install a variety of types of industrial fluid piping, fittings and valves including: iron pipe, steel tubing, hydraulic hose, plastic pipe, copper tubing, globe valves, gate valves, check valves, and Sloan valves.
The fluid piping trainer includes a mobile workstation, pump testing network, valve package, fitting package, fitting identification kits, Sloan valve maintenance kit, pipe insulation and hanger components, fitting storage, student learning materials for both theory and lab, and teacher’s guide. The workstation has slotted, movable members to enable a variety of hydraulic hose fluid piping application scenarios to be set up.
Pages
-
Item Number:950-TGC1 -
Offering unmatched depth and breadth of training, Amatrol’s Oil and Gas Program builds industry-relevant competencies using world-class simulators featuring industry-standard components and highly interactive curriculum. The Oil and Gas Program covers vital areas such as electrical, electronics, instrumentation and process control, and mechanical training. -
Amatrol’s Workplace Safety training courses explain the basic principles necessary to keep work environments as accident-free as possible. Learners will study the common causes of workplace accidents and the role of OSHA and other agencies regulating safety before moving to personal safety actions and awareness, such as Personal Protective Equipment, Hazardous Communication, Lockout / Tagout, and Accident Response. -
Tech-Labs offers equipment and curriculum from Amatrol’s Advanced Manufacturing program. Amatrol’s industry-leading equipment and curriculum are developed in partnership with industry to deliver job-ready, industry-relevant skills. Working closely with companies like Caterpillar, Tropicana, and many others Amatrol has designed equipment for workplace success. -
CNC Machine Operators require skills in operating a CNC machine but are not machinists. Through industry task analysis as well as strong involvement with our development partner, a large global manufacturer, Amatrol’s CNC Machine Operator Program brings a highly focused, streamlined set of skills to CNC Machine Operator training. -
Amatrol has developed the most comprehensive, in-depth selection of online electrical training solutions available today, beginning with the basics of AC/DC electrical and moving on to more advanced topics like electrical machines, relay control, and fabrication; electrical motor control; and electrical wiring and power distribution. -
Amatrol’s electronics learning systems combine hands-on skills and multimedia curriculum to form a training experience with unmatched breadth and depth. This product focusses on electronic drives and programmable logic controllers to give current and future workforce members the knowledge that they’ll need to excel in the their career paths. -
Important workplace training for the Oil and Gas industry includes Communication Skills, Conflict Resolution, Mathematics, Principles of Advanced Manufacturing, Trigonometry and Working in Groups. Amatrol’s Interactive Multimedia Gives Learners the Tool They Need to Excel. -
Item Number:295-712DAC Worldwide’s Angled Disc Butterfly Valve Cutaway (295-712) is an industrial valve sample and teaching aid that allows for convenient classroom or laboratory instruction in the design, construction, and maintenance of an angle disc-type butterfly valve. -
Item Number:281DAC Worldwide’s Annular Tube Heat Exchanger Model (281) is a highly-detailed scale model of a common annular tube (tube-in-tube) heat exchanger. The model provides realistic training in the operation and maintenance of industrial heat exchangers.
