DAC Worldwide’s 3-Variable Process Control Training System (601-000) is a working, large-scale, fluid process system allowing for hands-on training relating to the measurement and control of process variables including level, pressure, and flow.
A translucent stereolithography material for when you need to see the inner workings of the part you’re creating.
Somos® 9120 is a transparent stereolithography resin that is easy to use and fast to build. This stereolithography resin produces translucent, accurate parts that are semiflexible. Parts produced with Somos® 9120 exhibit excellent water and temperature resistance and mimic polypropylene.
Somos® 9120 is ideal for applications such as fluid flow analysis, electrical casings and automotive parts. As this material is semi-flexible, it can also be used for snap-fit functional testing.
Every material comes with a safety data sheet (SDS) to provide you with information to properly handle that specific liquid stereolithography resin. While there are risks of skin sensitization, these can be easily prevented with good housekeeping, good hygiene and use of personal protective equipment (PPE).
Formulated differently than conventional materials, UV-curable products require particular instruction for their safe handling. The information provided in this guide is designed to acquaint you with UV-cure technology, identify its potential hazards, and provide general direction and guidelines for the safe application and efficient use of solvent-free, UV-curable products.
This booklet is a guide for safe handling only. The precautions outlined here should be followed in close combination with instructions provided on our product labels and Material Safety Data Sheets (MSDS), as well as in consultation with your representative regarding your specific product.
Somos® BioClear has passed cytotoxicity, irritation, sensitization, and USP VI. A toxicological profiling of the components has been performed. A Device Master File to support this material is accessible through the FDA. Ask a sales representative for more information.
Steps in the production process of 3D printed parts can influence the final part safety. This document gives guidance on areas to pay attention to when using Somos® BioClear.
Improve efficiency with clear, accurate guides and models.
Perform faster, more accurate procedures with customized cutting guides and surgical models made with Somos® BioClear. Not only will this decrease the recovery time for patients, it can also lessen the chances of repeat procedures.
Somos® BioClear fulfills the requirements for non-implantable limited body contact (<24hr) medical and dental applications. Somos® BioClear has passed stringent ISO 10993-5 Cytotoxicity, ISO 10993-10 Irritation & Sensitization, and USP Class VI testing, after following the cleaning procedure as described in the Somos® BioClear user guide.
Parts produced from Somos® BioClear are accurate, clear and have ABS-like mechanical properties and a good combination of strength and toughness. The material is resistant to moisture and many common solvents and chemicals.
Fast and easy production of quality hollow composite tooling parts, that are easy to remove after the autoclave process.
While basic composite shapes with constant cross sections are easily manufactured using traditional composite manufacturing techniques, complex parts with hollow interiors present a unique challenge. Additive manufacturing has fundamentally changed the process. High-temperature, cost-effective tools can now be produced in days, compared to the weeks or even months required for traditional tooling, and provides a cost-effective solution even for small series production.
Somos® DMX SL-100, a durable and tough stereolithography (SL) resin, is an efficient and cost-effective solution that produces very accurate parts with a superb surface finish and high feature detail, promoting greater design freedom for composite applications.
Somos® DMX SL-100 withstands the high temperatures utilized in the autoclave process for composites manufacturing maintaining its flexural strength, elongation and tear resistance. These unique properties allow, at a certain temperature, for mandrels to be removed from complex and convoluted geometries through a “dry removal” process which is unique for a solid mandrel. Other soluble wash out cores need submerging in caustic which can affect the composite part. No other material in the industry is as easily and best removed after the autoclave process, facilitating the more efficient production of complex, hollow composite parts.
This method of using additive manufacturing to produce sacrificial tooling is straightforward and enables multiple iterations to be implemented quicker by the user.
In partnership with Covestro Additive Manufacturing (formerly DSM) and its Somos® resins, the Neo 3D printers can run the most technically advanced stereolithography materials.
A stereolithography material engineered to create flawless investment castings patterns.
Through continuous interaction with our customers, pattern makers and foundries, our team developed Somos® Element for producing investment casting patterns.
Somos® Element is an antimony-free stereolithography material specifically designed to improve the repeatability and quality of 3D printed casting patterns. Patterns created with Somos® Element leave trace amounts of lightweight, easily-removable ash residue after burnout and have better green strength, so there’s no worry of breakage during handling, while being dimensionally stable during storage. Any residue left behind is easily removed, leaving a perfectly clean void in the ceramic mold. This translates into lower mold prep times and lower rates of rework, saving customers time and money.
Key Benefits
- Trace amounts of ash that are lightweight and easily removed
- Suitable for high-end alloy castings
- Rapid draining
- Produces accurate, repeatable parts regardless of size
The investment casting material. Through continuous interaction with our customers, pattern makers and foundries, Somos® has developed Somos Element™ as the next generation of stereolithography resins designed explicitly for producing Investment Casting patterns.
When you need the best available balance of performance, faster builds, and post-processing, look no further than Somos® EvoLVe™ 128.
Pages
-
Item Number:601-000 -
Item Number:256DAC Worldwide’s 3-Way Control Valve Cutaway, ¾”-1” (256) takes classroom training in the operation, construction, and maintenance of an industrial control valve, and enhances it by providing a visual, hands-on learning aide. The fully-detailed examples of industrial three-way valves give learners a first-hand view into a component that is found in various maintenance applications worldwide. -
The BOFA 3D PrintPRO 2 is a low-cost unit that extracts fumes generated by the printer without causing the filament deposition area to be cooled.
It has the benefits of low noise level and minimal power consumption. Each unit is supplied with a connection hose, ‘Stay Put’ arm and conical shaped nozzle.
-
The BOFA 3D PrintPRO 3 incorporates an externally mounted plenum system which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.
The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption, and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ plenum instructions.
-
The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction off take point. the system can also return the filtered clean air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.
The BOFA 3D PrintPRO 4 combines high flow rate with speed control within a compact free-standing unit.
-
Item Number:3FG15With a payload of up to 15kg, the 3FG15 is ideal for gripping a wide range of cylindrical objects in machine-tending applications such as CNC lathe machines and offers seamless integration with the robots of your choice. -
Item Number:603-000Hands-on exercises include industry-relevant process control skills, such as: setting and adjusting pressure switches; installation and calibration of an electronic flow measurement channel; and determining a temperature, pressure, level, and flow process’ operation characteristics. -
Item Number:429EDAC Worldwide’s AC Variable Frequency Drive Training System Plus (429E) examines AC variable speed drive principles. Learners will explore variable frequency AC solid-state control of 3-phase electric motors in various automation applications. -
Item Number:T7017AThe model T7017A includes a bench top-mount workstation, AC power supply, DC power supply, electrical components set, lead set, hand-held multimeter, circuit tester, built-in instrumentation console, electrical circuit simulation software, student learning materials for both theory and lab, and teacher’s assessment guide. This system uses industrial quality components to help students become better prepared for what they will encounter on the job. -
Item Number:373-601DAC Worldwide’s ACR Liquid Line Filter/Drier Cutaway is a carefully-crafted, sectioned example of a commonly-encountered liquid line filter/drier.
