DAC Worldwide’s 3-Variable Process Control Training System (601-000) is a working, large-scale, fluid process system allowing for hands-on training relating to the measurement and control of process variables including level, pressure, and flow.
Simlog Electric Rope Shovel - Single-Pass Digging Module: Fill the dipper by digging at the rock face. The trial ends when there is material in the dipper, the dipper is no longer in contact with the rock face, and the operator activates the horn.
Simlog Electric Rope Shovel - Following Grade Module: make the rightmost dipper tooth follow the line (the cursor changes color as the tooth moves away from the line). The trial ends when the tooth reaches the end of the line, and the operator activates the horn.
Simlog Mobile Crane Personal Simulator's Signaling Module has trainees move a load to a target destination hidden from the view of the crane operator, and so a signal person is required.
The signal person must view the lift using the dedicated signal-person display and provide hand or voice signals to the crane operator to safely move the load into the target (the target changes color as the load gets closer).
Each trial ends when the load is sufficiently well placed (the target will turn green), the speed of the load is sufficiently small, and the crane operator activates the horn. Telescope extend/retract control is disabled for this module.
Advanced Edition features lift planning exercises that require a solid understanding of load charts and Signal Person training, i.e. learning to provide appropriate signals to the crane operator (to complete a lift), while at the same time teaching that crane operator to understand and follow those signals.
Simlog’s Skid Steer Loader Personal Simulator puts students at the controls of a typical skid steer loader equipped with either a bucket (with or without teeth) or forks, at work in a typical construction site. The simulator configuration options include Vertical or Radial lift path types, and two skid steer loader color combinations.
Replica Controls
The most cost-effective option featuring industrial-strength controls.
Key Benefits
- Easy to assemble and USB-ready
- Light weight and portable
- Ability to create your own operator chair
- Multi-Purpose Replica Controls
- Optional Two-Pedal Replica Control Unit
- ISO, H-Pattern, or Standard (with pedals)
Simlog’s Forklift Personal Simulator Version 2 puts trainees at the controls of a typical sit-down, counter-balanced factory forklift with rear-wheel steering. Training scenarios are typical of factories, warehouses, and distribution centers, with various loads and storage arrangements, truck bays for loading and unloading, and a flatbed truck outside.
Simlog’s Replica Controls for the Forklift Personal Simulator are the most cost-effective set-up option and feature industrial strength components suitable for table-top mounting and Simlog’s Operator Chair. If you are a Simlog customer, you may be able to re-use the Replica Controls that you already have.
You will need three or four USB-ready Forklift Levers. (The fourth lever controls the separation of the forks, so if you use three levers instead of four, the simulation software will change the separation of the forks for you.) Simlog’s table-top mounting brackets will bring the joysticks down from table-top height to the sides of an ordinary chair, to better mimic the positioning of real controls in the cabin of real heavy equipment.
To complete the Replica Controls, add the Logitech “G920 Driving Force Racing Wheel” consisting of a steering wheel and a three-pedal unit, and the “G920 Driving Force Shifter,” a gear shifter that can also be used with many other Personal Simulators. In most countries, the G920 is for sale in retail stores that sell computers or video games, but it may also be purchased from Logitech’s online store. Logitech’s previous version, the “G27 Racing Wheel” can still be used.
Key Benefits:
- Easy to assemble USB controls
- Lightweight and portable
- Ability to create your own operator chair
- 3 or 4-lever configurations available
Possible Setups
There are four commonly used arrangements, one with a single display in front, one with a first display in front and a second display in back (to teach people to turn their heads to look behind when backing up), one with three displays in front arranged side-by-side in portrait mode and one with three displays in front and a fourth display in back.
Custom Travel Cases for Replica Controls
For all setups, Simlog’s Custom Travel Case makes transportation easy.
Key Features
- Made-to-measure, with dedicated slots for levers, joysticks, pedals, steering wheel, and table-top mounting brackets
- Space for a laptop PC, cables, and documentation
- Pull-out handle, with multiple positions
- Wheels (casters)
- Cases are “stackable,” for easy transport.
Specifications
- Overall dimensions: 30″ x 24″ x 19″
- Approximate weight: 50 lbs. when empty, up to 100 lbs. when full (depending upon the Replica Controls.)
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Simlog's Hydraulic Excavator Personal Simulator puts trainees at the controls of a modern Hydraulic Excavator in interaction with an articulated dump truck. Using life-like dynamic terrain combined with our intelligent instructional design, your trainees are guided through a series of 12 skill-building Simulation Modules.
Simlog’s new Backhoe Loader Personal Simulator puts you at the controls of a backhoe loader at work in a typical construction site. Both SAE and ISO joystick patterns are available, and changing the point of view during the simulation is easy with joystick buttons, keyboard function keys and mouse controls.
Nine Simulation Modules of increasing level of difficulty begin by teaching basic skills and coordination in early exercises such as “Bucket Positioning” and “Stockpiling”. Later Simulation Modules culminate skills training with exercises such as exposing buried utilities with the backhoe bucket on "Buried Utilities - Perpendicular Excavation."
Simlog’s Wheel Loader Personal Simulator Version 2 puts you at the controls of a modern wheel loader equipped with either a bucket or forks, at work in a typical construction site with a dump truck or flatbed truck.
Simlog’s Wheel Loader Personal Simulator Version 2 puts you at the controls of a modern wheel loader equipped with either a bucket or forks, at work in a typical construction site with a dump truck or flatbed truck.
Pages
-
Item Number:601-000 -
Item Number:256DAC Worldwide’s 3-Way Control Valve Cutaway, ¾”-1” (256) takes classroom training in the operation, construction, and maintenance of an industrial control valve, and enhances it by providing a visual, hands-on learning aide. The fully-detailed examples of industrial three-way valves give learners a first-hand view into a component that is found in various maintenance applications worldwide. -
The BOFA 3D PrintPRO 2 is a low-cost unit that extracts fumes generated by the printer without causing the filament deposition area to be cooled.
It has the benefits of low noise level and minimal power consumption. Each unit is supplied with a connection hose, ‘Stay Put’ arm and conical shaped nozzle.
-
The BOFA 3D PrintPRO 3 incorporates an externally mounted plenum system which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.
The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption, and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ plenum instructions.
-
The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction off take point. the system can also return the filtered clean air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.
The BOFA 3D PrintPRO 4 combines high flow rate with speed control within a compact free-standing unit.
-
Item Number:3FG15With a payload of up to 15kg, the 3FG15 is ideal for gripping a wide range of cylindrical objects in machine-tending applications such as CNC lathe machines and offers seamless integration with the robots of your choice. -
Item Number:603-000Hands-on exercises include industry-relevant process control skills, such as: setting and adjusting pressure switches; installation and calibration of an electronic flow measurement channel; and determining a temperature, pressure, level, and flow process’ operation characteristics. -
Item Number:429EDAC Worldwide’s AC Variable Frequency Drive Training System Plus (429E) examines AC variable speed drive principles. Learners will explore variable frequency AC solid-state control of 3-phase electric motors in various automation applications. -
Item Number:T7017AThe model T7017A includes a bench top-mount workstation, AC power supply, DC power supply, electrical components set, lead set, hand-held multimeter, circuit tester, built-in instrumentation console, electrical circuit simulation software, student learning materials for both theory and lab, and teacher’s assessment guide. This system uses industrial quality components to help students become better prepared for what they will encounter on the job. -
Item Number:373-601DAC Worldwide’s ACR Liquid Line Filter/Drier Cutaway is a carefully-crafted, sectioned example of a commonly-encountered liquid line filter/drier.
