Amatrol’s Wind Turbine Generator Control Troubleshooting allows students to develop operation and troubleshooting skills...
Amatrol’s Thermal Technology 1 Learning System provides learners with the knowledge and equipment needed to comprehend the principles of modern thermal systems, such as HVAC, geothermal, refrigeration, and steam systems.
AC, Refrigeration & Heat Pumps
Amatrol's Thermal Technology 2 Learning System (96-TT2) teaches three types of thermal systems: air conditioning, refrigeration, and heat pumps. Students will learn industry-relevant skills including how to operate, install, analyze, and adjust these systems.
The Advanced Thermal Technology training is a working system with industrial components that can perform heat pump, air conditioning, and refrigeration systems operation. These components are mounted on a mobile workstation and supported by instrumentation, microprocessor control, student learning materials for both theory and lab, and teacher’s guide.
Belt & Chain Drive Training System
Amatrol’s Mechanical Drives 2 Learning System (97-ME2) covers the construction, operation, installation, and alignment of heavy-duty V-belt drives, synchronous belt drives, and heavy-duty chain drives. This system also delves into topics associated with the maintenance and proper operation of these drives, such as belt and chain selection, lubrication, couplings, and drive troubleshooting. The drive systems featured in this mechanical drives training system are utilized in countless automotive, agricultural, industrial, and commercial applications, so the advanced manufacturing career fields for learners using these skills are vast. This mechanical drives training expansion system requires the Mechanical Drives 1 Learning System (970-ME1), viscosimeter, and a computer.
The 97-ME2 consists of a coupling/sprocket package, belt drive components package, power transmission belt and chain package, a grease gun, various indicators, and a fastener kit. Learners will use these real-world components to practice hands-on skills, such as installing and aligning a backside V-belt idler, troubleshooting a V-belt drive system, using a grease gun to lubricate a pillow block bearing, and installing and aligning a silent chain drive system. Amatrol uses heavy-duty components that stand up to frequent training use and build the skills and competencies learners need to succeed in the workplace.
Amatrol's Laser Shaft Alignment Learning System (97-ME2A) covers the installation, operation, and applications of laser alignment in a variety of industrial scenarios. Laser shaft alignment is the preferred method of shaft alignment among maintenance and plant engineering personnel due to its superior efficiency and accuracy over older methods like the dial indicator method or the straight edge and feeler gauge method. Laser alignment systems also avoid problems such as sagging indicators, reading resolution error, and reading parallax error. These components add to the Mechanical Drives 2 Learning System (97-ME2) and the Mechanical Drives 1 Learning System (970-ME1).
Amatrol’s 97-ME2A includes a laser alignment system, two measuring units, two shaft v-brackets, two locking chains, and a motor mount horizontal adjustment assembly. Amatrol learning systems are composed of heavy-duty components that provide learners with real-world equipment they’ll recognize on the job and already understand how to use. These components will be used to study topics like rough alignment, laser shaft alignment installation, soft foot correction, and laser shaft alignment operation and analysis.
Bearings, Gaskets, & Seals Training
Amatrol’s Mechanical Drives 3 Learning System (97-ME3) covers plain bearings, ball bearings, roller bearings, anti-friction bearing selection and maintenance, gaskets, seals, advanced gear drives, and gear drive selection and maintenance. The drive systems featured in this mechanical drives training system are utilized in countless automotive, agricultural, industrial, and commercial applications, so the advanced manufacturing career fields for learners using these skills are vast. This mechanical drives training expansion system requires the Mechanical Drives 1 Learning System (970-ME1), viscometer, and a computer.
This mechanical drives training system consists of a fastener kit, worm gear speed reducer, ball bearings package, roller bearings package, plain bearings package, angular contact bearings, bearing press, seals package, and helical gear set. Learners will use these real-world components, like bearings and gaskets, to practice hands-on skills, such as troubleshooting a plain bearing installation, selecting a lubricant for an anti-friction bearing, and calculating a diametral path. Amatrol uses components that learners work with in real-world environments in order to facilitate the strongest competency skill building and to supply heavy-duty components that stand up to frequent training use.
Amatrol’s Predictive Maintenance Vibration Analysis Learning System (97-ME5A) adds to the Mechanical Drives 1 training system (970-ME1) to teach how to use vibration analysis to determine when to perform power transmission component maintenance. Vibration analysis is one of the key techniques used in the field of predictive maintenance to determine when to service one or more of a machine’s components, either making a replacement or adjustment, before a failure actually occurs. Learners will practice industry-relevant skills including how to use a vibration meter to take a vibration measurement, how and where to take various power transmission system measurements, how to read power transmission vibration analysis, and how to minimize vibration.
Amatrol’s Machine Tool Chip Conveyor Learning System (97-ME4E) adds to Mechanical Drives training (970-ME1) to teach chip conveyor installation, operation, adjustment, conveyor belt removal, conveyor maintenance, and conveyor troubleshooting. Machine tool chip conveyors carry metal chips produced by machine tools and use heavy-duty steel link belts usually arranged in a serpentine shape.
The 97-ME4E trainer features an endless belt, manual start/stop control, electric motor drive, safety guards, and more! Learners use these components to study the operation, installation, construction, cleaning, and troubleshooting a chip conveyor. Amatrol uses components found on-the-job in order to give learners the best opportunity to build confidence and industrial competencies.
Amatrol’s Floor-Standing Belt Conveyor Learning System (97-ME4D) adds to the Mechanical Drives 1 training system (970-ME1) to teach skills related to flat belt conveyors, such as flat belt conveyor operation, adjustment, maintenance, and more. Flat belt conveyors are used in industry to transport material and packages from point-to-point at low cost. Learners study industry-relevant skills including installing, adjusting, maintenance, and inspection of flat belt conveyors.
Amatrol’s Plain Bearing Machine Tool Axis Learning System (97-ME4B) adds to the Mechanical Drives 1 Learning System (970-ME1) and the Mechanical Drives 4 Learning System (97-ME4). It includes a dovetail slide with corrosion-inhibiting wrap, Student Learning Activity Packet, Instructor’s Guide, Installation Guide, and Student Reference Guide.
This supplementary learning system adds to learners’ understanding of mechanical drives by teaching the fundamentals of dovetail slides, including component identification, disassembly and reassembly, proper positioning with a micrometer dial, removal and inspection of a tapered gib, and maintenance.
Amatrol’s Roller Pack Machine Tool Axis Learning System (97-ME4A) adds to the Mechanical Drives 1 training system (970-ME1) to teach machine tool axis drives based on the roller-pack type bearing. Roller-pack bearings are precision bearings made specifically for the machine tool axis to provide precision positioning of the axis under heavy load. Students will learn industry-relevant skills related to this new topic including operation, installation, troubleshooting, and design.
Pages
-
Item Number:950-TGC1 -
Offering unmatched depth and breadth of training, Amatrol’s Oil and Gas Program builds industry-relevant competencies using world-class simulators featuring industry-standard components and highly interactive curriculum. The Oil and Gas Program covers vital areas such as electrical, electronics, instrumentation and process control, and mechanical training. -
Amatrol’s Workplace Safety training courses explain the basic principles necessary to keep work environments as accident-free as possible. Learners will study the common causes of workplace accidents and the role of OSHA and other agencies regulating safety before moving to personal safety actions and awareness, such as Personal Protective Equipment, Hazardous Communication, Lockout / Tagout, and Accident Response. -
Tech-Labs offers equipment and curriculum from Amatrol’s Advanced Manufacturing program. Amatrol’s industry-leading equipment and curriculum are developed in partnership with industry to deliver job-ready, industry-relevant skills. Working closely with companies like Caterpillar, Tropicana, and many others Amatrol has designed equipment for workplace success. -
CNC Machine Operators require skills in operating a CNC machine but are not machinists. Through industry task analysis as well as strong involvement with our development partner, a large global manufacturer, Amatrol’s CNC Machine Operator Program brings a highly focused, streamlined set of skills to CNC Machine Operator training. -
Amatrol has developed the most comprehensive, in-depth selection of online electrical training solutions available today, beginning with the basics of AC/DC electrical and moving on to more advanced topics like electrical machines, relay control, and fabrication; electrical motor control; and electrical wiring and power distribution. -
Amatrol’s electronics learning systems combine hands-on skills and multimedia curriculum to form a training experience with unmatched breadth and depth. This product focusses on electronic drives and programmable logic controllers to give current and future workforce members the knowledge that they’ll need to excel in the their career paths. -
Important workplace training for the Oil and Gas industry includes Communication Skills, Conflict Resolution, Mathematics, Principles of Advanced Manufacturing, Trigonometry and Working in Groups. Amatrol’s Interactive Multimedia Gives Learners the Tool They Need to Excel. -
Item Number:295-712DAC Worldwide’s Angled Disc Butterfly Valve Cutaway (295-712) is an industrial valve sample and teaching aid that allows for convenient classroom or laboratory instruction in the design, construction, and maintenance of an angle disc-type butterfly valve. -
Item Number:281DAC Worldwide’s Annular Tube Heat Exchanger Model (281) is a highly-detailed scale model of a common annular tube (tube-in-tube) heat exchanger. The model provides realistic training in the operation and maintenance of industrial heat exchangers.
